RCE Bundle with Jacketed Cell

SKU: [RCE15-J] Category: Tags: ,

Join the rest of the community that depends on Pine Research Instrumentation Rotating Cylinder Electrode systems.   Our 15 mm RCE electrode system is the trusted tool to perform corrosion analysis, namely screening of corrosion inhibitors.  Identifying and selecting all the required components of a complete RCE electrochemical corrosion screening system can be a daunting task.  We have helped ease that burden by organizing RCE bundle options with several options to suit your laboratory needs.

The RCE Bundle with Jacketed Cell is everything you need except a potentiostat and rotator and features the 1 liter cell with water jacket.  Customers typically select this bundle for the following reasons:

  • Routine rotating cylinder experiments, such as Linear Polarization Resistance, are performed for corrosion inhibitor screening
  • It is the most commonly used RCE system in the world
  • The water jacketed cell is desired for heating with a circulating water bath
  • Compatible with ASTM standards G31, G170, and G185

The RCE bundle with Jacketed Cell  includes cylinder electrode, graphite counter electrode, glass cell with all accessories, and Luggin Tube and gas inlet fritted tube.  Complete this bundle with the addition of a potentiostat and rotator (sold separately).


Description

Reference electrode is not included with this Bundle.  Please purchase a reference electrode separately!

MAXIMUM ROTATION RATE: 4000 RPM — Never exceed maximum rotation rate when working with rotating electrodes.

TEMPERATURE RANGE: 10°C – 80°C — Electrode damage may occur at temperatures beyond recommended range.

CHEMICAL INCOMPATIBILITIES: Concentrated Strong Acids — Damage or discoloration may occur.

This series of RCE tips may be used with the MSR Rotator.

Join the rest of the community that depends on Pine Research Instrumentation Rotating Cylinder Electrode systems.   Our 15 mm RCE electrode system is the trusted tool to perform corrosion analysis, namely screening of corrosion inhibitors.  Identifying and selecting all the required components of a complete RCE electrochemical corrosion screening system can be a daunting task.  We have helped ease that burden by organizing RCE bundle options with several options to suit your laboratory needs.  A complete RCE system requires a potentiostat, electrode rotator, rotating cylinder electrode, cell with all accessories, counter electrode, reference electrode, and common accessories such as Luggin tubes and gas sparge/purge tubes.

The corrosion cell included with this bundle is the 1 liter cell with water jacket.  To control the temperature inside the cell, consider adding a water circulator to your cart.

The 15 mm OD Rotating Cylinder Electrode (RCE) system features a number of improvements over previous designs which will assist you in your high velocity (high shear) corrosion testing.   The larger 15 mm diameter gives you more wall shear at the cylinder surface at a given rotation rate (as compared to the traditional 12 mm OD design).

Insulation. All shaft components are fabricated from a chemically resistant polymer (PEEK) to protect the shaft from corrosive attack during testing. At elevated temperatures, this polymer has good mechanical stability as compared to the traditional PTFE-based 12 mm OD design.

One Liter Cell. With an overall one liter capacity, the cell features a removable lid with six flexible side ports. You can equip your cell with a variety of accessories (condenser, pH measurement, thermowell, each sold separately) while still having enough ports for the reference and counter electrode. Cells with drain valves and water jackets are also available.

Alignment. The standard RCE glass cell features a special recess in the bottom of the cell into which the lower end of the RCE shaft is inserted. This recess provides a guide for aligning the shaft along the center line of the cell.

Purging. A dual port purge accessory is included with the cell which permits you to sparge the solution and/or blanket the solution with a purge gas. In addition, the gas-purged bearing assembly, through which the rotating shaft enters the cell, has a separate purge port so that you can maintain a positive purging pressure within the internal space of the bearing itself.

Specimens. The lower end of the electrode shaft accepts 15 mm OD x 6.4 mm tall replaceable cylinder inserts. The nominal cylindrical surface area exposed to the solution is 3.0 square centimeters. Standard cylinder inserts fabricated from a variety of steel materials are offered by Pine Research. Custom inserts fabricated from other materials are available upon request. Alternately, cylinder inserts with the appropriate dimensions may be fabricated by the customer.

Contact. Reliable electrical contact between the shaft and the replaceable cylinder insert is accomplished using a spring-loaded ball plunger which pushes against the inside diameter of the cylinder insert.

Visit our YouTube channel for helpful instructional videos regarding the use and maintenance of this and many other Pine Research products.