RDE/RRDE Cell With Water Jacket

This standard 150 mL cell features five round glass ports.  The center port (24/25) is large enough to easily accommodate the shaft of a rotating disk or ring-disk electrode.  The four side necks are smaller (14/20) and can be used to mount reference and counter electrodes and other accessories.  This cell has an integrated water jacket that can be used to heat the contents of the main cell chamber.  Two hose barbs provide access to the outer water jacket chamber.  The hose barbs accept flexible tubing with a 1/4″ (6.4 mm) internal diameter (such as Tygon 2375 tubing, 6.4 mm ID × 9.6 mm OD).  Two accessories are included to permit deaeration of the cell contents.  A dual inlet accessory which mounts in one of the side ports can be used to sparge the cell solution and/or blanket the solution with an inert gas.  A single outlet accessory serves as the escape path for the sparging/purging gases.  A complete set of PTFE stoppers for sealing the cell is also included.

The RRPG310 cell was recently revised!  The hose barbs are now on the same side (top and bottom), to fit more ideally in the WaveVortex 10 Rotator!