The WaveDriver 40 DC Bipotentiostat/Galvanostat is an affordable benchtop bipotentiostat/galvanostat system capable of performing a wide variety of single and dual working electrode DC electroanalytical techniques. Unlike many other bipotentiostat offerings on the market, the fundamental design of the WaveDriver 40 makes it just as easy for you to use two working electrodes in an electrochemical cell as it is to use just one working electrode.
True Integrated Bipotentiostat. From the software to the cell cable design, everything about the WaveDriver 40 bipotentiostat makes working with dual working electrode configurations as straightforward as possible: no messy inter-channel connections are required, and no additional cell cables or adapters are required. The WaveDriver 40 connects to your laptop or PC via a standard USB cable and is controlled by our powerful AfterMath software. The software user interface is designed with two working electrodes in mind, so entering experimental parameters for dual-electrode techniques is quick-and-easy.
If you also need to perform Electrochemical Impedance Spectroscopy (EIS), please choose one of our WaveDriver 200 bundles instead.
Applications. The WaveDriver 40 finds use in academic and industrial research laboratories around the world and across a wide variety of applications. The instrument offers a large range of accessible current ranges (±100 nA up to ±1 A) and potential ranges (±2.5V up to ±15 V) along with advanced filtering and iR compensation. Back panel connections allow rotation rate control when performing voltammetry using a Rotating Disk Electrode (RDE), Rotating Ring-Disk Electrode (RRDE), or Rotating Cylinder Electrode (RCE). Additional input/output and timing connections permit the WaveDriver to control third-party instrumentation in applications such as UV/Visible Spectroelectrochemistry.
Cost Effective. Take a look around at similar bipotentiostat/galvanostat systems and you will have a difficult time finding one with comparable specifications and capabilities at the same modest price point. Designed with the everyday user in mind, the specifications for the WaveDriver 40 bipotentiostat are broad enough to permit you to perform a wide range of routine electrochemical techniques but also prudently chosen to allow for a simple and affordable design. Popular and common techniques such as cyclic voltammetry, bulk electrolysis, differential pulse voltammetry, square wave and pulse voltammetry, battery charge/discharge sequences, corrosion techniques (such as linear polarization resistance), chronoamperometry, and chronopotentiometry are easily configured and executed using our AfterMath software package.
What makes the WaveDriver 40 bipotentiostat even more powerful?
Combining it with a precision electrode rotator manufactured by Pine Research…
MAXIMUM ROTATION RATE: Each electrode tip model used with the Pine Research MSR Rotator has a maximum rotation rate. Do not the exceed maximum rotation rate when working with rotating electrodes.
The Pine Research MSR Rotator is the most popular rotating electrode configuration worldwide. This flexible electrochemical instrument may be used with Rotating Disk Electrodes (RDE), Rotating Ring-Disk Electrodes (RRDE), and Rotating Cylinder Electrodes (RCE). The MSR Rotator bears both the CE and ETL marks and is compatible with most international power configuration standards.
The rotation rate of the electrode may be adjusted using a control knob on the front panel of the motor control unit, or alternately, the rotation rate can be controlled via an analog control signal provided by a potentiostat or by a third-party waveform generator. The rotation rate may be viewed using the LCD display on the front panel. The rotation rate is adjustable over a range from 50 to 10,000 RPM and is accurate to within 1% of the reading on the display. A rotation rate may also be monitored via an output signal proportional to the rotation rate which is available on the front panel.
The rotation rate may be controlled and modulated by a sine wave, square wave, or other externally generated waveform. The outstanding acceleration characteristics of the motor and its control circuitry allow the rotation rate to follow the control waveform with very little error. This feature is particularly desirable for techniques such as Hydrodynamic Modulation Voltammetry (HMV) .
The rotator motor position is easily raised or lowered with respect to the cell platform, making immersion or removal of the rotating electrode tip quick and easy. The enclosure base is made from chemically resistant polypropylene, and the large enclosure window provides a good view of rotating electrode during operation. (A smaller base is available separately for using the rotator in a glove box or fume hood.)
Electrode connections are made to the rotating shaft using silver-carbon brushes. There are two pairs of contacts – the red pair is for the disk, and the blue pair is for the ring.
Visit our YouTube channel for helpful instructional videos regarding the use and maintenance of this and many other Pine Research products.